Video Transcript: 

Your pedal assist electric bike includes an APT 800 intelligent display. In this video we’ll walk you through the various settings on this display.

To power on your bike,  press and hold the center power button for two seconds.   The default setting is for pedal assist level one.

You can adjust the pedal assist levels by pressing the plus and minus buttons on the control located by your left grip.

Riders can access various screens on the display when riding to view information on their ride by pressing the power button.  This information includes average speed,  maximum speed, the trip odometer, total odometer and trip duration.

You can reset the trip calculator at any time by pressing and holding the plus and minus buttons simultaneously for two seconds.

To activate the lights on your bike,  press and hold the plus button for two seconds,  which will turn on the backlight and any lights hard wired to your bike.

You can enable walk assist mode by pressing and holding the minus button until a P appears on screen.

For information on adcanced settings on this display,  please see our other videos.

 

Other Repair & Maintenance Video Guides

R750 Rack Installation

R750 Rack Installation

All Terrain R750 Rack Installation To install the rack, you’ll need to locate the bolts that were shipped with your rack. The first step is to attach the rack stays to the front of the rack. You’ll need to add the two bolts to the top of the rack and add the U-Shaped...

R500 Display Guide

R500 Display Guide

The XC Sport R500 and Dual Sport R500 utilize a Landian Display unit that features both pedal assist and throttle mode operation. Please see the operational instructions below. These settings can be adjusted with the bike powered on at a full stop. To power on the...

Home     The Bikes   About M2S Bikes  Owner's Guide   Support  Contact Us

Email: sales@m2sbikes.com   support@m2sbikes.com   Phone: 828-676-3808