To install the fenders on your All Terrain R750, you’ll need the following tools:

  • Needle nose pliars
  • 8mm wrench
  • Allen wrench

To install the front fender, you’ll need to remove the bolt on the fork that is also used to attach the front light. Thread the bolt through the fender and tighten the bolt. The metal attachment point of the fender can be bent slightly to adjust the angle to get the best angle for riding.

To install the rear fender, you’ll need to use a set of needle nose pliars or 8mm wrench to make accessing the bolt a little easier as the space between the tire and the bolt is pretty tight.

Position the fender in place and hand-tighten the bolt. You can use the 8mm open ended wrench to fully tighten the bolt before riding.